Allied Telesis AT-DMC100/ST network media converter 100 Mbit/s 1310 nm Multi-mode Grey

Allied Telesis AT-DMC100/ST network media converter 100 Mbit/s 1310 nm Multi-mode Grey

ALLIED TELESIS

GBP 131.99 There is one offer for this product.

100 Mbit/s 2000 m 1310 nm. DC-in jack. Multi-mode ST. DMC Series. Gigabit Desktop USB-Powered Media Converters. The Allied Telesis DMC Series of Gigabit mini media converters are among the smallest media converters in the market today. Overview. At just 1.25 inches wide × 3.6 inches deep × 0.85 inches high, Allied Telesis DMC Series media converters can easily fit into the palm of a hand. In addition to being compact—with a small carbon footprint—the DMC Series can also be powered with the included Micro USB to USB cable, and plugged directly into a laptop or PC or may also be powered via the optional AC/DC adapter. This saves installation time and cabling as there are no further power requirements. Fiber Connections. The Allied Telesis range of Gigabit media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting SC, ST and LC fiber connectors, these converters can be used to extend networks with up to 500m of multi-mode fiber. VLAN Support. Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send data packets on the network. DMC Series media converters are fully compatible with. Smart MissingLink (SML). The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime. Simple Installation. All Allied Telesis media converters feature auto MDI/MDI-X, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of the fiber connection, by forcing the converters to communicate over the fiber cable. This Link Test feature allows installers to check for cable faults without the need for expensive fiber-optic test equipment. Smart Link Restoration. Smart Link Restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them. Power Saving. The DMC Series continues the Allied Telesis commitment to the environment with over 50% power savings. With just 1.5W of power usage, DMC Series media converters are some of the most efficient in the market today. these packets, enabling them to be used in modern networks. Network. Cable types supported. Fiber. Duplex system. Full, Half. Rate limiting. Yes. Auto MDI/MDI-X. Yes. Packet forwarding rate (1 Gbps). 14880 pps. Packet forwarding rate (100 Mbps). 148800 pps. Packet forwarding rate (10 Mbps). 1488000 pps. Ethernet LAN data rates. 100 Mbit/s. Converter output interface. 100Base-FX. Converter input interface. 100Base-TX. Maximum data transfer rate. 100 Mbit/s. Performance. Fiber mode structure. Multi-mode. Wavelength. 1310 nm. Maximum transfer distance. 2000 m. Features. Internal. No. Ports & interfaces. DC-in jack. Yes. Fiber optic connector. ST. Weight & dimensions. Weight. 113.39 g. Height. 21.6 mm. Depth. 91.4 mm. Width. 31.8 mm. Operational conditions. Operating altitude. 0 - 3048 m. Storage relative humidity (H-H). 5 - 95%. Operating relative humidity (H-H). 5 - 95%. Storage temperature (T-T). -15 - 65 °C. Operating temperature (T-T). 0 - 40 °C. Packaging content. AC adapter included. Yes. Logistics data. Harmonized System (HS) code. 85176990. DMC Series | Gigabit Desktop USB-Powered Media Converters

Compare offers

  • Back to the Office Out of stock
    GBP 131.99

Specifications

Network

Maximum data transfer rate
100 Mbit/s
Converter input interface
100Base-TX
Converter output interface
100Base-FX
Networking standards
IEEE 802.1Q
Ethernet interface type
Fast Ethernet
Ethernet LAN data rates
10,100 Mbit/s
Auto MDI/MDI-X
Yes
Auto-negotiation
Yes
Duplex system
Full, Half
Link Loss Carry Forward (LLCF) supported
Yes
Link Loss Return (LLR) supported
Yes

Performance

Maximum transfer distance
2000 m
Wavelength
1310 nm
Fiber mode structure
Multi-mode

Features

Internal
No
LED indicators
Yes
Product colour
Grey

Ports & interfaces

Connectivity technology
Wired
Ethernet LAN (RJ-45) ports
1
Fiber ports quantity
2
Fiber optic connector
ST

Power

Output voltage
5 V

Weight & dimensions

Width
31.8 mm
Depth
91.4 mm
Height
21.6 mm
Weight
113 g

Operational conditions

Operating temperature (T-T)
0 - 40 °C
Storage temperature (T-T)
-15 - 65 °C
Operating relative humidity (H-H)
5 - 95%
Storage relative humidity (H-H)
5 - 95%
Operating altitude
0 - 3048 m

Certificates

Compliance certificates
RoHS
Safety
UL60950-1, EN60950-1

Database Right data-sheet 2026 Icecat. All rights reserved. · Specs Icecat