Sand filter system 13200 L/h with pre-filter/filter glass

monzana®

GBP 201.95 There is one offer for this product.

The SF110K sand filter system is equipped with extensive accessories and leaves nothing to be desired. The top-mount 7-way valve ensures perfect handling. In addition, the SF110K sand filter system is suitable for saltwater pools. ImPORTANT OPERATING INSTRUCTIONS: Before the first use, it is mandatory to fill the filter bowl completely with water, after that the sand filter system supplies itself self-priming.   Settings on the Top-Mount 7-Way Valve:1. Filter - Cleans the water- Setting for normal operation2. Backwash - Cleans the filter3. Rinse - Causes a residual cleaning and compaction of the sand4. Circulate5. Drain6. Winter - recommended position in winter7. Closed   Our sand filter system has a large tank capacity of approximately 30 litres. You can fill the filter bowl with up to 27 kg of filter sand. The hygienic alternative to filter sand Filter glass granules bring long-lasting hygiene to any pool. Replace the sand in your filter system with the filter glass granulate and enjoy the benefits. Filter glass is an optimal filter medium. Due to its angular shape, large surface area and structured arrangement in the filter system, even the smallest particles are filtered out of the water. The water remains crystal clear and the formation of germs and biofilm is prevented. The environmentally friendly alternative The filter glass is made of 100% white glass and is free of impurities. During backwashing, the granulate is completely cleaned. This means you need significantly fewer chemicals and other care products in the pool. Long-lasting and efficient The filter glass granulate can remain in the filter system for up to 5 years and wears out very slowly during this time due to the friction in the filter. In addition, you need about 25% less filling material than with other filter media. Product advantages: especially high flow rate up to approx. 13.200 L/h Top-mount 7-way valve Base for firm and safe stand Large tank volume: 30 litres detailed operating instructions with convenient pressure gauge (manometer) powerful pump integrated pre-filter robust pump housing drain valve on pump housing and pre-filter TÜV Rheinland certified - GS tested safety (Can be found under product group: MZPP => Model number: MZPP27) IPX5 jet-proof Technical data: max. Flow rate: approx. 13,200 L/h Tank volume: 30 litres Suitable for up to 27 kg filter sand Pumping height: 11 m Power max.: 600 Watt Protection class: IPX5 Mains cable: 190 cm long 2 in 1 adapter: Ø 1¼" = 32 mm | Ø 1½" = 38 mm Colour: Black / Blue Product advantages Filter glass: Grain size: 0.4-0.8 mm Filter medium cannot clump or clog Filter glass forms almost no biofilm d.i.e. considerably longer service life, less chemical consumption no components are released into the water because of the homogeneous filter bed, less backwash water is required (cost saving) filter glass needs to be changed less areas of application: Filter systems, bath water filters Technical data: Grain size 0.4 - 0.8 mm Material: 100% white glass (not used glass) Note for pool owners: We recommend dismantling the system in winter, especially if there is a risk of frost! The connecting pipe between the tank and the pump is located in the pipe of the boiler of the sand filter system. Please remove it before commissioning and connect it to the intended place. The filling aid must be removed after filling the sand filter system. If you use filter balls, you must not backwash our filter system either! If you use swimming pool hoses with a 1½" connection, you can cut our adapter to the corresponding hose size to ensure a maximised flow. We recommend that you never fill the tank to the top so that there is sufficient air circulation. Scope of delivery: 1 x sand filter system incl. pump and accessories 1 x bag with 25 kg filter glass granulate Instruction manual Note: Sand filter system and filter glass are supplied in two packages .