Vision TM-1200 project mount Ceiling White
VisionGBP 74.80 There are 2 offers for this product.
The Techmount is a universal projector ceiling bracket designed to secure most video data projectors safety and sturdily to your ceiling.<br><br>We only have one projector ceiling bracket in our range: it comes with a 1.1m pole and it is designed to be useful in 99% of installations. That means built in flexibility allowing quick assembly in a number of different configurations including "flush-mount" where the projector is as close to the ceiling as possible.<br><br>We believe the fixed pole style we use is the best for rigidity and because you cut it to length onsite it has an infinitely variable length.<br><br><b>Safety Approved</b><br>We believe it is good practise to use a safety fall-arrest tether which secures the projector to your bracket so we've included one.<br><br><b>20kg SWL</b><br>Independent testing on calibrated hydraulic test equipment has shown a breaking-strain of half a ton! We recommend a maximum safe working load of 20kg which is well within it's limits.<br><br><b>Obstruction-free Cable Management</b><br>Rather than having a long bolt that runs through the pipe and blocks cable access we use our unique quad-bolt Chute-through system which leaves cable access clear - even for a big VGA connector.<br><br><b>Secure</b><br>We believe quick-release mechanisms make life easier for thieves so our mount is secure and features security bolts.<br><br><b>Sloping Ceilings?</b><br>If you have a sloping ceiling there is a tilting mechanism included which tilts to a full 90 degrees allowing you to use the bracket as a boom if need be.<br><br><b>Tools Included</b><br>A spanner and pin-hex key are included. The only tool you'll need is a 2" pipe cutter (NOT INCLUDED - ask your hardware supplier for a pipe cutter with a 6-67mm range and a metal cutting disk). With this tool you'll cut the pole like a knife through butter.<br>We've also included a drilling jig so you can easily and accurately drill 9mm holes into the pole.<br><br><b>Easy fit</b><br>Fitting the bracket to the projector is simple; most projectors have threaded inserts in the bottom for attachment. But because not all use the same diameter screws we provide a selection of screws to suit almost all projectors. Simply adjust the arms on our bracket over the attachment holes and insert a screw into the projector.<br>Finish the job properly!<br><br><b>TM-1200 Trim Disk</b><br>Aesthetics are also enhanced by our exclusive retrofittable trim disk which is fitted to the pole in false-ceiling environments to properly finish the installation.